Ambient Guitar Tip #2: Setting Up and Using Stereo Delays
Tip 2: How to set up a microphone in Windows
Check the jack your microphone is connected to. Often, the connectors on the front panel are incorrectly connected during assembly. It is best to use the back panel. The microphone input is marked with a red tint; for different manufacturers, the color may vary from light pink to almost brown.
Open the computer control panel. To do this, left-click the Start menu in the lower left corner of the screen, then click on the Settings item or Control Panel, depending on the settings, the name may differ.
If you have Windows XP, find the words “Sound, speech and audio devices” and click on it. A window will open in which you need to select the “Sounds and Audio Devices” item. You will see a property bar with five tabs. Left-click on the “Audio” tab. In the central part of the window, under the heading “Record audio”, select from the drop-down list a microphone marked USB, if it is built into the webcam.If not, leave it unchanged. Click on the “Volume” button, which is located immediately below the drop-down list.
A small window will open with three columns of volume controls. Tick the column above which the “Microphone” is written and set the desired volume level. Then click the “Settings” button under the slider. Tick the box “Microphone Boost” and click “OK”. Done, microphone setup is complete.
If you are using Windows 7 or Vista, select "Hardware and Sound" in the control panel. When the next settings page opens, click on the “Manage Sound Devices” link. Select the “Record” tab with the left mouse button. A window will open in which you click once on the Microphone label, and then activate the "Properties" button.
On the “General” tab at the bottom, under the “Device use” mark, select “Use” from the drop-down list and click “Apply”.
Go to the “Specials” tab and tick the Microphone +20 dB Boost box. Apply the changes.
Next, switch to the section with the heading "Levels". You will see a slider and volume indicator.Increase the volume by moving the slider to the right. Please note that the button with a pattern in the form of a loudspeaker is not marked with a crossed out circle in red. Click on it if it is. Click the "OK" button at the bottom of the window to close and save the changes.
Video: 12 Tips - How to setup my DJI Mavic Pro - Before you Fly
Tip 2 Setting up Transition with subtitles
Hiker Tip #2: How to set up the Big Agnes Fly Creek UL2 in a strong wind
Related newsHow inexpensive to relax on the sea
How to drink curacao
Tip 2: How to increase the processor voltage
Tip 2: How to send video to email
How to cook white with meat
Совет 2: Стиль хай-тек в интерьере
How to get an unemployed to the exchange in 2019
What fruits contribute to weight loss
How to draw a goldfish